_ Pneumatic sealless strapping buckle-free pneumatic strapping wholesale quality assurance portable pneumatic PET strapping Model: GH-19/25 Weight: 3.8kg Max tension: 3200N with form letters: friction welding For Bandwidth: 12 -19mm Applied with a thickness: 0.4-1.27mm action mode: pneumatic tightening, automatic closure with automatic cut with a suitable material: PP, PET with a pressure source: 0.65pa Machine Specification: 280 * 160 * 180mm PET, plastic buckle-free pneumatic Baler Specifications: 12mm, 16mm, 19mm, 25mm color: white aluminum suitable material: PP band / PET with service products: pneumatic packer: Any number Ganghai GH and human damage free year warranty and are easily damaged 5 months parts warranty, the warranty period of time more than seven days for maintenance customers can always make a backup machine application, provided free of charge, guests use due to compliance matters standby machine. Production Manufacturers: Performance Ganghai Technology (Hong Kong) Ltd products: a friction welding baler, overlapping thermoplastic strap heat generated by friction movement combination, so called "friction welding" compressed air cylinder piston depressed, the upper portion of the piston and the vibrator and the positioning pins are connected together, a vibrator pressed against the overlapping portion of the belt package. Vibrator has an oval hole, and the air motor is connected to the aperture of the eccentric shaft, the air motor rotates at high speed, which makes rapid reciprocate the vibrator. Packaged with the lower triangle is the bottom mold teeth fixed, the upper triangular teeth driven by a vibrator, intense friction. Thus, packaged with the overlapped portions of overheating welding, vibration timer when it is set in the end time, welding ends. Upper and lower strap at the same time squeezing cement, standing a few seconds to make sure the cooling weld Department has also called strapping strapping, sub automatic balers and pneumatic strapping, portable strapping points. Baler principle is to use straps wrapping the product or package, and then tighten both ends by melting or use the package thermal effects such as withholding material connected machine. The function is to make the plastic strapping tape can be tied closely to the surface of the package, ensure that packages in transport, storage is not due to binding is not strong and scattered, while also tying neat appearance. Products for industry: 1, tie: pneumatic strapping strapped packaged with the packaging, the left part of the overlapping grip, the tail about leaving around 300mm, with his right hand and gently pull out the remaining part. Loading strap: right hand holding the handle and tensioner (to ensure that the platen roller and hang tight interdental largest open), top and bottom of the pack with the same time insert packer. Note: The pneumatic packer packaged with the overlapping portions must be separated under a fixed blade knife: Loosen tensioner (wheel tightly clamped tight packing tape). 2, tension strap: with the right hand thumb and hold the tension switch lever (right) switch until the strap is fully tightened. 3, vibration and off: with the right hand thumb and hold the vibration switch lever (red) until the strap cut and weld Note: Hold down the pneumatic packer vibration switch lever until the timer automatically stops vibrating. 4. Remove the packing tape: squeeze the handle and the tensioner right, with the right hand little finger pressed against commutation switch until the strap from Panasonic to tighten the wheel. Squeeze the handle and the tensioner, the tool moves to bring down from the pack. Ganghai Technology (Hong Kong) Limited ___ pneumatic sealless strapping buckle-free pneumatic strapping wholesale _ Quality Assurance